SAMPLES NEEDED
4 complete units
LAB TIME
3 business days
TYPICAL TURNAROUND
1-7 days
RE-TESTING
Every 24 months
You probably need this if
You ship lithium ion cells, modules or packs of 12 kg or more (UN3480 / UN3481)
You built a new crate or protective enclosure for a battery program
A carrier refused a shipment pending certification
What the test involves
The sequence we run for Lithium Battery Packaging Test. Exact parameters are confirmed against the current revision of the standard before testing begins.
01
Test plan and configuration review
02
Drop test of protective enclosure
1.2 m per 49 CFR 173.185
03
Stacking test
04
Test report
What to send us
4 complete packaged samples, assembled exactly as they ship.
Design drawings or a packaging specification, if you have them.
The Safety Data Sheet — required before regulated testing can begin.
Ship to 9708 Industrial Drive, Bridgeview, Illinois 60455.
Not sure the count is right for your configuration? We confirm it with you before you ship anything.
This certification expires
Lithium Battery Packaging Test is normally re-tested every 24 months, and sooner if the packaging changes. We keep track of when your testing comes due and tell you before it lapses — you should not find out from a rejected shipment.
Common questions
Is there a packing group for lithium batteries?
No. UN3480 and UN3481 are Class 9 and are assigned no packing group. 49 CFR 173.185 prescribes a 1.2 m drop height regardless.
Can you test a full battery crate?
Yes - large-format enclosures and EV battery crates are routine work here.
Not certain Lithium Battery Packaging Test is the right test?
Answer a few questions about what you ship and we will tell you which standard applies — and why the others do not.
